Product Name: Particle Filtering Half Mask
Classification: FFP2 NR EN 149:2001+A1:2009
User Instructions:
1. A properly selected mask is essential, before occupational use, the wearer must be trained by the employer in the correct
use of the mask in accordance with applicable safety and health standards.
2. This mask does not supply oxygen. Use it in adequately ventilated and where containing sufficient oxygen to support life.
3. Leave the contaminated area if dizziness, irritation or other distress occurs.
4. Discard the mask and replace with a new one if:
a) Excessive clogging of the mask causes breathing difficulty. b) The mask become damaged.

Warning and Limitations:
1. Do not use this mask or enter or stay in a contaminated area under the following circumstance:
a) Atmosphere contains less than 19.5% oxygen.
b) If you smell or taste contaminant.
c) For protection against gases or vapors.
d) Contaminants or their concentrations are unknown or immediately dangerous to life or health.
e) For sandblasting, paint-spray operations and asbestos.
f) In explosive atmospheres.
2. Do not modify or mis-use the mask.
3. Do not use the mask with facial hair or any other conditions that may prevent a good face-seal, the requirements for face-seal will not be achieved.
4. Change the mask if a proper face seal cannot be achieved.
5. Change the mask immediately if breathing becomes difficult or mask becomes damaged or distorted.
6. This mask helps protect against certain particulate contaminants but does not eliminate exposure to out the risk of contracting disease or infection. Misuse may result to sickness or death.